Designed for use with small indoor or small to mid-sized outdoor multirotor crafts,or as a standalone camera stabilizer. The Naze32 flight controller is extremely simple to setup,with configuration based on the familiar ldquo;Multi Wiirdquo; software.
5.3 grams (no headers, 7.3 grams with)
2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6050)
3-axis magnetometer (HMC5883L) (Flip32+ only)
Pressure sensor (MS5611) (Flip32+ only)
Flexible motor outputs, support various airframe types -
Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X)
Up to 8 ch RC input - supports standard receivers (PWM), PPM Sum receiver (FrSky, etc), or Spektrum Satellite receiver.
Battery voltage monitoring
Modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
16Mbit onboard SPI flash
Onboard MicroUSB for setup and configuration
LEDs so bright, they will blind you
MultiWii-based configuration software for easy setup
rev v2.3 hardware
1 * Flip32+ 10DOF Flight Control Board
Flexible motor outputs, support various airframe types.
Designed for use with small indoor or small to mid-sized outdoor multirotor crafts, or as a standalone camera stabilizer.
Compatible with Naze32 firmware,including baseflight and cleanflight.
With smaller Dimensions of 36mm*36mm and lighter weight of 5.3g.with barometer and compass,and space reserved for barometer and accelermeter.
More filght controller product is provided by us in Amazon.Bring your eyes into the sky and racing like a free bird, enjoy the ultimate first person view